Solar 60W underground concrete rainwater system

Complies with ATS 5200.477 rainwater mains

Complying with AS/NZS 1546.1

supply changeover device - Licence No. 60005

Underground sewage ejector stations

Licence approval number SMKB20582

NEW! View information about:
Onga Water Pump

Solar 60W underground concrete rainwater system

Wall mounted control panel with variable

speed pump 0 to 20 litres per minute at

operating pressures to 600Kpa with inbuilt

mains water bypass system to ensure a

continuous water supply during power failure

The latest development in rainwater harvesting and recycling system is the Solar powered Series 60W from ABS environmental

Using a 12 volt 140 watt self priming variable speed pump this remarkable system senses the difference between the low flow

requirements needed for toilet cisterns and the higher flow needed for washing machine filling and garden irrigation. Electronic

control adjusts the pump speed automatically to achieve optimum results. A low energy requirement means that this system

can be powered by solar cells, to give a true meaning to the concept of environmental savings. As the system is only 12 volts

site wiring is as simple and safe as solar powered garden lights. Installation can be carried out by semi skilled operators

An electronic control panel is supplied, with inbuilt by-pass valve and dual check non-return valve. When a tap is turned

on in the house or garden the control module will react and sense the demand for water. The pump will start automatically

provided that there is power available, and that there is sufficient water in the tank. In the unlikely event of a power failure

the control module will change to by-pass mode to provide an uninterrupted supply of fresh water from the mains supply

These features ensure that there will always be a reliable supply of clean, fresh water for toilet flushing and laundry use

The concrete tank is built to AS1546.1 standards and incorporates a lower anchor flange to prevent uplift in water laden soil

A first flush flush filter is mounted in the turret riser to trap leaves and grit. These are simply washed away to the overflow

Delivery to site is by a crane truck with a 5 metre reach. The tank can be installed directly into the excavation to save time

The control panel contains the pump and inlet filter as well as all of the electrical components. This means that the tank can

be installed during the early stages of construction, with the control panel containing all components at a later suitable date


Complies with ATS 5200.477 rainwater mains
supply changeover device - Licence No. 60005
The Aqua Automation water management control system with mains back-up
for all above ground and below ground tanks



This system is specifically designed for toilet flushing and washing machine filling, but it can also be
used for a single garden tap for limited periods
Remember - rainwater is a limited resource - use it wisely - low water usage is sensible water usage


Light weight wall mounted	5.5 kgs
Safe operation	12 volts DC
Simple installation	semi skilled installer ( only 12 volts - no need for an electrician )
Compact size	440 mm wide x 440 mm high x 170 mm deep
Energy efficient	only 140 watts
Pump performance	0 to 20 litres per minute
Maximum pressure	to 600 Kpa
Inlet and outlet connections	19 mm
Watermark accredited	Yes
Automatic variable speed control	Yes
Self priming	Yes
Dry running capability	Yes
Inbuilt dual check valve	Yes
Visible light to show tank water or mains water in use	Yes
Inlet suction filter provided	Yes
Suitable for above or below ground rainwater tanks	Yes
Suitable for optional solar power	Yes
Standard method of tank level measurement	12 volt DC float


Schematic arrangement of Solar 32W rainwater re-cycling system Solar 32W rainwater re-cycling system


Rainsaver Water Systems Pty Ltd
PO Box 79 Oakdale NSW 2570
Australia
phone (02) 4680 8114
fax (02) 4680 8115
email info@rainsaverwatersytems.com.au